• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 546 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54202: Brownout

Kuramochi Tadahiko
Guru 28715 points
Part Number: TPS54202
Other Parts Discussed in Thread: TPS54260, TPS54240

Hi,

Is the brownout occurred at low dropout and light load on the TPS54202.

Brownout → www.ti.com/.../slva547a.pdf

On other words, is the Boot cap charged by turning on the Lo-side FET when detected BOOT UVLO?

Best Regards,

Kuramochi

  • 0
    TI__Guru**** 191445 points
    TPS54202 is a synchronous converter. It should not drop out in the manner of the TPS54240 and TPS54260 family. You are correct that it can work at duty cycles > 100%. The high side FET can stay on until the BOOT voltage (relative to SW) fally below 2.1 V. The high side will turn off and the low side turn on briefly to re-charge the BOOT capacitor.