Looking for Green PHY based Level 3 Electric Vehicle Service Equipment Reference Design

HEENA PANCHAL

I wan to develop Level 3 Electric Vehicle Service Equipment for which I would like to consider TI reference design. I want to PLC based communication system with Green PHY.

Please suggest appropriate design to develop my product.

Thanks & Regards,

Heena

over 8 years ago

0 Ed Walker over 8 years ago

Prodigy 5 points

Hello Heena,
I would suggest starting in this area of TI.COM
TI Home > Applications > Automotive >Hybrid, Electric & Power Train Systems
www.ti.com/.../overview.page

And this document shows many solutions, including PLC.
Hybrid and Electric Vehicle Solutions Guide
www.ti.com/.../szza058c.pdf

These will help guide you to solutions.

0 Ed Walker over 8 years ago in reply to Ed Walker

Prodigy 5 points

Here is some training on EV charging:
training.ti.com/introduction-ev-charging-stations-piles

Introduction to EV Charging Stations (Piles)
This training series will discuss the design considerations for global EV charging station standards and the differences to consider for AC versus DC charging stations and for residential vs. public stations. The training also includes deep dives into the block diagrams with subsystem analysis and recommendations.

Power management

Power management forum

Looking for Green PHY based Level 3 Electric Vehicle Service Equipment Reference Design