LM3881: maximum value for Cadj

K.Yaita

Part Number: LM3881

Hi Team,

I found the information for minimum value for Cadj.
https://e2e.ti.com/support/power_management/svs_and_sequencers/f/212/p/208795/739134#739134

May I have your comments for maximum value for Cadj?
I would like to ask if there is recommended capacitor type (ceramic, tantalum, aluminum, etc).

Best Regards,
Yaita / Japan disty

over 8 years ago

0 yihe over 8 years ago

TI__Guru 66250 points

Hi Yaita-san

How long you want to delay the FLAG output?

Regards

Yihe

0 K.Yaita over 8 years ago in reply to yihe

Guru 29720 points

Hi Yihe-san,

Thank you for your response.
My customer considers 100-200ms delay at this time however also wants to know maximum capacitor value (maximum delay) that LM3882 supports for the future.

Best Regards,
Yaita

0 yihe over 8 years ago in reply to K.Yaita

TI__Guru 66250 points

Hi Yaita-san
1s delay is supported by device without issue.
Regards
Yihe

Power management

Power management forum

LM3881: maximum value for Cadj