• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 252 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Part suggestion

Rolan Lan
Prodigy 30 points
Other Parts Discussed in Thread: BQ35100, BQ34Z100-G1

Dear supporter,

 

In my design,there will be 2 Lithium battery(each with 3.6V ,2450 mAh, Non chargeable) on the board.

We need to monitor the left battery capacity and forward this information to the MCU.

 

Could you give us some suggestion about choosing the right part?

  • 0
    TI__Expert 4065 points

    Hi Rolan,

    Thank you for considering TI devices in your design, please check our primary lithium battery fuel gauge and battery end-of-service monitor bq35100, additionally, we had some of our customers successfully used bq34z100-G1 in their primary battery applications as well.

    Regards,

    Haidar