• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 728 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ51052B: bq51052b

andrea brambati
Prodigy 100 points

Part Number: BQ51052B

what is the maximum voltage between GND and Ac1 and GND and AC2?

to charge up to 300-500 ma what kind of inductor do you suggest (wurth elektronics part number)

thanks a lot and best regards

  • 0
    TI__Guru* 79526 points
    The AC1 and AC2 input Absolute Max rating is -0.8V to 20V. The OVP ckt will trip at 15V and limit voltage at about that point. The AC1 and AC2 inputs feed the internal full wave rectifier, output is at RECT. Voltage will be a diode drop negative and a diode drop above RECT voltage.

    What size coil are you looking for?
    Something the size of the one used on EVM or smaller?