Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 782 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5109: Peak current vs. Vdd

Brian Wang0928
Genius 12810 points
Part Number: LM5109

Customer like to know if there is plot curve for peak(sourcing & sinking) current versus the Vdd?

How about the impedance/Rds(on) in the H/L gate driver?

  • 0
    TI__Intellectual 2910 points

    Hi Brian,

    I will look into this further characterization data availability, although most of the time such curve is not collected. The datasheet typical value for the peak source/sink current is for VDD = VHB = 12V, VSS = VHS = 0V conditions. The general trend is higher current peak with higher VDD. I will also consult with the designers about the Rds(on) values.

    Please allow a business day or so for us to look for this data.

    Regards,

    - Daniel

  • 0
    TI__Intellectual 2910 points

    Brian,

    Thank you for your patience. I have checked and we do not have peak Iout vs Vdd characterization data available for this device.

    Regarding the RdsON, typical values for DC RdsON are 4ohm for the pull-down and 6ohm for pull-up at room temperature.

    Regards,

    - Daniel