LM2588: LM2588

Brian Cavanagh97

Part Number: LM2588

Hi, I created a design in WEBENCH, see attached. The transformer required is custom, but I'm not sure where to go and have it made. The turns ration NS1-to-Np is 9. All the information is available in the BOM.

Can anyone make a recommendation on where I can go? I've never ordered a customer transformer and not very confident with the process.

Thanks,

Brian

webench_design_4789768_14_706277488.pdf

over 7 years ago

0 Youhao Xi over 7 years ago

TI__Guru 73570 points

We recommend you to contact a magnetics Vendor like Wurth, TDK or Coilcraft, and they may have the off shelf part for your use.

0 Garrett Roecker over 7 years ago

TI__Mastermind 21720 points

Hi Brian,

Ordering a custom flyback transformer can be made easy by contacting a magnetic vendor directly. I would suggest finding an transformer close to the specification that are stated and then contact that vendor and have them make the desired changes. Here is a good application note to read through that will help you understand the important specifications of transformer design.

Thanks,

Garrett

Power management

Power management forum

LM2588: LM2588