WEBENCH® Tools/LMR14050-Q1: Sim Export or longer Webench simulation time

Chris Patterson

Part Number: LMR14050-Q1
Other Parts Discussed in Thread: LMR14050,

Tool/software: WEBENCH® Design Tools

I'm finding Webench to be extremely limited as a true simulator to determine device suitability. No Sim Export function is enabled for this TI product.

Will either of these deficiencies be resolved in the near future? Changing the maximum simulation time of Webench seems to be a very reasonable solution.

over 8 years ago

0 Surinder Singh over 8 years ago

TI__Expert 3085 points

Hello Chris,
You could use run the commercial version LMR14050 instead of LMR14050-Q1 in WEBENCH for Simulation Export purposes. They should be identical electrically.
Regards,
Surinder

0 Chris Patterson over 8 years ago in reply to Surinder Singh

Prodigy 100 points

Thanks, I'll try that. One other thing I noticed: After changing/editing the schematic in Webench, I don't see the stability simulation in any of the tabs, only a transient startup simulation. Is this to be expected?

Power management

Power management forum

WEBENCH® Tools/LMR14050-Q1: Sim Export or longer Webench simulation time