Output capacitor of TL1963A-3.3

Takahiro Nishizawa

Genius 5575 points

Other Parts Discussed in Thread: TL1963A

I have a question about output capacitor of TL1963A-3.3 .

In datasheet p.17 Figure 31. , Output capacitor of TL1963A-2.5 is 10µF.

When we use TL1963A-3.3, is the output capacitor 10µF?

Best regards,

Takahiro Nishizawa

over 8 years ago

0 Kyle Van Renterghem over 8 years ago

TI__Genius 14245 points

Hi Takahiro,

Yes all versions of the TL1963A family require a minimum output capacitor of 10uF. Below is a section from the output cap section in the PDS which addresses both the capacitor value and the ESR requirements.

-Kyle

Power management

Power management forum

Output capacitor of TL1963A-3.3