• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 908 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Solution against LT8301

masahiko shimizu
Guru 11235 points
Other Parts Discussed in Thread: UCC28740, UCC28C43

Hi,

My customer is using LT8301.

I want to replace this. But I think that TI product don't have product witch can replace LT8301.

I considered Fly-buck product. But this topology doesn't have regulation ability.

Customer wants BOM area to be more small.

Could you advice me about this, please? 

Best regards,

Shimizu 

  • 0
    TI__Expert 4015 points
    Hi Shimizu, as far as I'm aware TI does not have a similar part as you note. Our approach would be to use a UCC28c43 or UCC28740 type device with an external MosFET. I don't see that this will reduce the BoM area.
    Regards
    Billy