Team
my customer is using the TPS43332 and would like to enable a Forced PWM Mode. Please provide a solution how to lock the device in Forced PWM Mode.
Best Regards
Matthias
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Team
my customer is using the TPS43332 and would like to enable a Forced PWM Mode. Please provide a solution how to lock the device in Forced PWM Mode.
Best Regards
Matthias
Hello Matthias,
please refer to datasheet page 20, table 1:
If SYNC is pulled high on the TPS43332-Q1, the part is in forced continuous mode with spread spectrum enabled.
Best regards,
Frank