• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 1088 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

find "BMS105 DC-DC loop design" ppt

harry xie2
Prodigy 75 points

Now I have a paper "Buck Converter Modeling, Control, and Compensator Design" from TI, but it is incomplete lacking of "Current Mode Loop Compensator design" section, so I am looking for it, thanks in advance.

Buck Converter Modeling, Control,and Compensator Design.pdf

  • 0
    TI__Genius 9130 points
    Harry,

    I am not sure of the orgins and author of the slides you attached, so it's hard to find the follow-on current mode control slides that are mentioned at the end.

    However, here are links to a presentation and white paper from the recent 2017 TI Power Supply Design Seminar, including a very thorough topic on control loop compensation for a wide range of topologies:

    http://www.ti.com/lit/slup341
    http://www.ti.com/lit/slup340

    There are several other papers on the TI website covering control loops for buck converters, including current-mode:

    www.ti.com/lit/an/snva555/snva555.pdf
    www.ti.com/lit/slua101
    www.ti.com/download/trng/docs/seminar/Topic3BL.pdf
    www.ti.com/lit/pdf/snva542
    www.ti.com/lit/an/slua371/slua371.pdf
    www.ti.com/lit/an/slva057/slva057.pdf


    I hope this helps you out and meets your needs.

    Thanks,
    Bernard