• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 480 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27541: how to know BQ27541 is calibrated

Ray Hsu
Expert 1330 points
Part Number: BQ27541

Is there any way to know if this amount of electricity has been calibrated by IC?

For example, let MCU read the location of a register and know if it has been calibrated.

But I looked at this datasheet and didn't seem to see such a register.

Please give us some suggestions. Thank you

  • 0
    TI__Guru* 76230 points
    Hi Ray,
    Can you pls clarify what you mean.. Are you referring to if a learning cycle has been completed or if the voltage, temp, and current has has calibrated. If learning cycle, update status will be 06. There is no bit to tell if the V,I, T has been calibrated. You just need to check the accuracy of the VIT measurements.
    thanks
    Onyx