This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25703AEVM-732: bqStudio does not have image files

Part Number: BQ25703AEVM-732
Other Parts Discussed in Thread: BQ25703A, BQSTUDIO, EV2400, BQ25700A

We are trying to evaluate the bq25703a but are unable to due to the fact that bqStudio does not recognize it. 

In the evaluation module user guide (sluubg6-May2017) it specifies to use bqStudio 1.3.45 or newer and an EV2400. 

We have the latest (non-test SW) version 1.3.54 and neither the "Charger_1_00-bq25700ASMB.bqz" nor "Charger_1_00-bq25700AI2C.bqz" appear on the list of chargers.

Its been two months since the release of this document yet support is not there? I hope to not have to install the test version of bqStudio as we use it for other purposes and its buggy enough as is. 

We appreciate a prompt response. Thanks

  • It should be there. I checked it on the release day. But, you can copy the attached files to your local bqstudio/config folder. And then, you are able to see them.

    https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/Charger_5F00_1_5F00_00_2D00_bq25703A.bqz

    https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/Charger_5F00_1_5F00_00_2D00_bq25700A.bqz

  • I reinstalled it twice and no luck. 

    These files however solved it.

    Thanks!