• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 515 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24780S: What is tolerance of fast DPM deglitch Time?

Paul Yeh
Genius 16185 points
Part Number: BQ24780S

Hi All,

do we have this speicifcation can share with customer?

For example: If the response time is 150us but what's tolerance?? ± xxus or %

 

Thanks

 

  • 0
    TI__Guru 56650 points
    Does customer want to check the buck mode to boost mode transition timing?
    In the datasheet, we have three different options for fast DPM deglitch Timing: 50us, 150us and 250us. Those parameters only has typical number in datasheet. In general, that timer should has a similar tolerance with other same type timer. What is the customer concern with 150us setting?