A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thanks for answer.
Are you sure that formula true?
Maybe Vout(@1A) = Vout (@50mA) + 10 mV/A * (1A-50mA) ?
And what about line regulation formula?
Thank you
Typically load regulation causes Vout to go lower as more current is applied, however it could also go higher. For a higher accuracy 1-A device I would advise using a part like hte TPS7A47, and if you don't need the Vin/Vout range the TPS7A91.
Line regulation will be similiar: Vout(@max Vin) = Vout(@min Vin) +/- line reg (mV/V) * (max Vin - min Vin)
It can sometimes be in %, other times in V/A or V/V - keep that in mind. The choice usually depends on what dominates the equation for a particular device.
