LM2576: Layout review

Yogesh Digraskar

Part Number: LM2576

Dear Sir,

We would like to verify layout for LM2576 adjustable DC regulator at earliest. As we will be using this product in automotive application it should work well it should pass EMI-EMC tests etc. and should work well in normal condition too.regulator lm2576 layout.docx

Regards

Yogesh

over 7 years ago

0 Arief Hernadi over 7 years ago

TI__Mastermind 23835 points

Hi,

A couple comments
1) Bring input capacitor closer to pin 1
2) Make the pin 2 trace short between output to inductor. Because that trace is switching so you want it to make the node as small as possible so it does not radiate EMI
3) Are you using EMI filter at all?

Here are some useful application note in regards to EMI
www.ti.com/.../snva638a.pdf

www.ti.com/.../snva489c.pdf

Thanks
-Arief