Starterware/TPS53819A: How to use "TI Digital Power Manufacturing Tool" to programming TPS53819?

Chen Bogey8

Mastermind 9990 points

Part Number: TPS53819A
Other Parts Discussed in Thread: TPS53819, , TPS40425

Tool/software: Starterware

Hi Sir

How to use "TI Digital Power Manufacturing Tool" to programming TPS53819?

Bogey

over 8 years ago

0 Mathew Jacob1 over 8 years ago

TI__Expert 5910 points

Bogey,

It is similar as using Fusion GUI software and please refer to user guide.

Regards,
mathew

0 Chen Bogey8 over 8 years ago in reply to Mathew Jacob1

Mastermind 9990 points

Hi Sir

In my status, it seems have some problem, may you pls help?

0 Mathew Jacob1 over 8 years ago in reply to Chen Bogey8

TI__Expert 5910 points

Is the resistor divider set for Address 16 on the board, please refer to page 22 of the datasheet.

Regards,
Mathew

0 Mathew Jacob1 over 8 years ago in reply to Mathew Jacob1

TI__Expert 5910 points

TPS53819A datasheet

0 Mathew Jacob1 over 8 years ago in reply to Mathew Jacob1

TI__Expert 5910 points

To get address 16, the high side resistor to ADDR pin should be 300k and low side resistor should be 1k.

Regards,
Mathew

0 Chen Bogey8 over 8 years ago in reply to Mathew Jacob1

Mastermind 9990 points

Hi Sir
The Customer set up the high side resistor to ADDR pin should be 300k and low side resistor is 1k.
But "TI Digital Power Manufacturing Tool" still can't get TPS53819 device.(but fudtion can get tps53819)
Bogey

0 Chen Bogey8 over 8 years ago in reply to Chen Bogey8

Mastermind 9990 points

Hi Sir

May you have suggestion?
Bogey

0 Mathew Jacob1 over 8 years ago in reply to Chen Bogey8

TI__Expert 5910 points

Bogey,

I have consulted with Ray who is our expert on the PMBUS programming aspects.

Regards,
Mathew

0 Ray Chen over 8 years ago in reply to Mathew Jacob1

TI__Prodigy 580 points

Hi, Bogey,

Did you import a system file to manufacturing tool to build the manufacturing tool script? If so, would you mind sharing with us the system file you're using?

It can be a bug in the importing function. Please allow us some time for debug this.

Thanks.

Best regards,

Ray

0 Chen Bogey8 over 8 years ago in reply to Ray Chen

Mastermind 9990 points

Hi Ray

pls refer enclosed file.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/S6000_5F00_TPS40425_5F00_Addx17_2D00_18_2D00_19_2D00_16.7z

Bogey

0 Anne Ngo77 over 8 years ago in reply to Chen Bogey8

TI__Genius 9320 points

What MFR GUI version are you using? Please use the Fusion MFR GUI version 7.0.19, published on July 26, 2017 (link below) to see if the issue resolve. You can manually scan for the TPS53819A device using the "Advanced menu ->Device Scanner...", and then click on "DEVICE_CODE Only" button.

www.ti.com/.../fusion_mfr_gui

Power management

Power management forum

Starterware/TPS53819A: How to use "TI Digital Power Manufacturing Tool" to programming TPS53819?