BQ78350: BQ78350

Carlo Treves

Prodigy 20 points

Part Number: BQ78350

After writing 0x001D to ManufacturerAccess() to toggle the SAFE pin, the BQ78350 stop communicating on the SMBus.

over 8 years ago

0 Onyx Ahiakwo over 8 years ago

TI__Guru* 76230 points

Hi Carlos,
What were you trying to achieve writing 1D to manufacturer status? Have you tried recycling power to the chip or try reprogramming it with the default srec file.?

thanks
Onyx

0 Carlo Treves over 8 years ago in reply to Onyx Ahiakwo

Prodigy 20 points

Dear Onyx,

I tried recycling power but it did not work because I did not used the right procedure. After applying more than 1V to an appropriate pin at boot, the BQ78350 booted properly and it is now working as expected.

Thanks

Power management

Power management forum

BQ78350: BQ78350