• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 561 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z100-G1: update gpcrb into the gauge

micou ludovic
Expert 1225 points
Part Number: BQ34Z100-G1
Other Parts Discussed in Thread: GPCRB, BQSTUDIO

Hello,

I receive a RBCRB file for my battery but when I program the gauge with this file, I have a message : Chemistry programming Failed error code = 1.

I testing to program with a chemistry into the list and the programm is sucessfully for discriminate that the gauge or the file is the problem.gpcrb.zip

  • 0
    TI__Guru* 76230 points
    Hi Micou
    I was able to program the chemdat file you attached one a board, using bqstudio. Make sure you are using the latest version of bqstudio, Make sure you unit is powered on with >3V per cell and finally make sure your device is not in a sealed state.

    thanks
    Onyx