BQ20Z655-R1: Default DFI

Hello,

Yes that solves my issue, thank you!
Also I see that I made the topic title wrong, I meant the bq20z65 not the bq20z655. But I see that you attached the correct file.

I'm afraid it still does not work with bqeasy. bqeasy asks for a .encr file of the device because it's not found.

I guess it's not installed with the other installer of the bq20z95 (it's not in the device list of that bqeasy version).

Do you have a different version of the bqevsw for the bq20z65? I have 0.9.92 but that one is broken with bqeasy.

Hi Rud,

see if this attached .encr file helps.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/bq20z65R1_5F00_1_5F00_05.encr

thanks

Onyx

I'm getting an error at the end saying: Sorry cannot configure dataflash without valid .encr file!

Also at the start of the wizard I get "Unrecognized device or bqEASY cannot find the .encr file for the connected device."
Maybe my bqeasy version (which comes from the bq20z95 package) is not compatible with it?

Yes! This installer finally worked! Solved my issues (it's an older version 0.9.64, before you sent me 0.9.92). This one works without any problems, I can update my flash using the wizard.
Thank you for your patience!

No worries. i understand using our gauges can be a challenge sometimes.
cheers
Onyx