BQ25700AEVM-732: Missing file: “Charger_1_00-bq25700ASMB.bqz”

Michael Rourke

Part Number: BQ25700AEVM-732
Other Parts Discussed in Thread: BQ25700A

Trying to evaluate the BQ25700AEVM-732 development board.

I am interested in the bq25700A device that uses SMBus.

I do not see the configuration file "Charger_1_00-bq25700ASMB.bqz". There was a thread that included a configuration file but it only supports the I2C version.

Can you please provide the "Charger_1_00-bq25700ASMB.bqz" configuration so I can communicate with the bq25700A using SMBus.

Thank you.

over 7 years ago

0 Wang5577 over 7 years ago

TI__Guru 56650 points

e2e.ti.com/.../611912

You can find bq25700A.bqz in above link. bq25700A.bqz is the SMBus version to support bq25700A.

0 Michael Rourke over 7 years ago in reply to Wang5577

Intellectual 350 points

So even though BQ Studio shows the page as I2C, it's really running the SMBus protocol?

0 Wang5577 over 7 years ago in reply to Michael Rourke

TI__Guru 56650 points

If "tgt address" is 12(9), The GUI is for SMBus protocol.

Power management

Power management forum

BQ25700AEVM-732: Missing file: “Charger_1_00-bq25700ASMB.bqz”