This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM2842: Schematic Review Request

Part Number: LM2842

Hello,

Could you review attached LM2482 schematic and let me get the result?

Regards,

Nicky

LM2842_Sch.pdf

  • Nicky,

    Looks pretty good. Here are my thoughts:

    1. What is your output current?
    2. You may consider using a catch diode with 1A rating (if IOUT~600mA) and lower forward voltage for better current safety margin and higher efficiency.
    3. I would place at least 2.2uF for input cap (C52 or 53).
    4. You can tie EN (!SHDN) directly to Vi to save a resistor if you don't need it.
    5. Boot cap should be 0.15uF or higher.

    -Sam