TINA/Spice/UCC28180: UCC256304

user5151806

Prodigy 60 points

Part Number: UCC28180
Other Parts Discussed in Thread: TINA-TI, , UCC24612, UCC256304, UCC256303, UCC256301

Tool/software: TINA-TI or Spice Models

Dear Sir,

does TI provide Spice model for UCC28180, UCC24612, and UCC 256304? I just find their simplis model. thanks.

over 7 years ago

0 Benjamin Lough over 7 years ago

TI__Mastermind 27095 points

Hi,

There is a Tina model available for UCC28180:www.ti.com/.../toolssoftware.
At this time, there is only a simplis model available for UCC24612 and UCC256304.

Best Regards,
Ben Lough

0 user5151806 over 7 years ago in reply to Benjamin Lough

Prodigy 60 points

Hi, thank you so much, I will try it in simplis.

0 user5151806 over 7 years ago in reply to user5151806

Prodigy 60 points

dear Ben Lough,
I have download UCC25630X simplis model, but it is not the model with postfix .lb, it is simplis schematic with postfix .sxsch. So would you like to help us to solve this problem? thanks!

0 Benjamin Lough over 7 years ago in reply to user5151806

TI__Mastermind 27095 points

Hi,

I will look into this issue. Also I forgot to mention that a webench model is available for UCC256304 which might be of use to you:webench.ti.com/.../quickview.jsp

Best Regards,
Ben Lough

0 user5151806 over 7 years ago in reply to Benjamin Lough

Prodigy 60 points

Hi,
when opening UCC256303_simplis_trans.sxsch, it notes that the model is encrypted.
So would you give me some suggestion how ti obtain unencrypted simplis model for the IC.
thanks so much.

0 Benjamin Lough over 7 years ago in reply to user5151806

TI__Mastermind 27095 points

Hi,

I'm not able to provide decrypted models. What is it you are trying to simulate?

Best Regards,
Ben Lough

0 user5151806 over 7 years ago in reply to Benjamin Lough

Prodigy 60 points

Dear Sir,
I am trying to desing a 400V-20V DC/DC converter with UCC256301 and UCC24612, now I can not simulate the circuit with simplis due to encrypted models.In addtion, could I apply for the samples of UCC24612-1 from TI website?
thanks for your help!
xinhong

0 user5151806 over 7 years ago in reply to user5151806

Prodigy 60 points

HI,

can the pin RVCC of UCC256304 contact to the pin of UCC28180 to power it? the power stage is 450W.

thanks!

xinhong

0 Benjamin Lough over 7 years ago in reply to user5151806

TI__Mastermind 27095 points

Hi Xinhong,

RVCC of UCC256304 is 12V typical. The UVLO threshold of UCC28180 is 12.1V maximum. It would be better to power UCC28180 from the VCC rail of UCC256304 and use a small LDO to regulate.

Best Regards,

Ben Lough

Power management

Power management forum

TINA/Spice/UCC28180: UCC256304