BQ34110EVM-796: No response

Jason Teoh

Part Number: BQ34110EVM-796
Other Parts Discussed in Thread: BQSTUDIO

Hi Sir/Mdm,

I had this BQ34110EVM and I'm trying to use it with BQstudio but there is no response. Can i know how to check on the address and how to setup?

Regard's

Jason

over 7 years ago

0 Onyx Ahiakwo over 7 years ago

TI__Guru* 76230 points

HI Jason,
Pls refer to the EVM user guide for instructions on how to set up and use the device.

www.ti.com/.../sluubi1

thanks
Onyx

0 Jason Teoh over 7 years ago in reply to Onyx Ahiakwo

Intellectual 400 points

Hi Onyx,

i had followed the instruction from the EVB guide but when i open up the BQstudio, it can't detect the broad. Please help to advice which of the thing i miss out.

Regard's

Jason

0 Onyx Ahiakwo over 7 years ago in reply to Jason Teoh

TI__Guru* 76230 points

Hi Jason,
Can you describe your set up? What voltage are you powering your board with? Do you have the jumpers for less than 5V or >5V? Can you send a screen shot of the bqstudio screen that shows when you try starting the gauge?

thanks
Onyx

Power management

Power management forum

BQ34110EVM-796: No response