• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 577 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24735: Required Battery monitoring facility

Shaithanya Chenniah
Intellectual 285 points
Part Number: BQ24735
Other Parts Discussed in Thread: BQ40Z50-R2, BQ34Z100-G1

Hi 

   we are using BQ24735 Battery management IC in our system for Lithium ion Battery charging. we need additional feature called Battery fuel guage monitor. can you please suggest few part numbers which can support BQ24735. 

Regards

Shaithanya C

  • 0
    TI__Genius 14985 points

    I assume your pack is 1-4s since you are using bq24735 for the charger.

    In that case you can look at bq40z50-R2 for a gauge to put inside your battery pack that will perform the gauging, safety protection, and cell balancing functions.  It supports 1-4 series cells.

    If you cannot put a gauge inside your pack then you can also look at bq34z100-G1 which is a bolt-on gauge that can support any number of series cells but it does gauging only.

  • 0 in reply to dMax
    Intellectual 285 points

    Hi 

        our battery pack is 4S1P. will it support for bq34z100-G1, if not please suggest alternate part.

    Regards

    Shaithanya C