Other Parts Discussed in Thread: TINA-TI
Tool/software: TINA-TI or Spice Models
Hi,
I want to point out the advantages of a n-FET + Smart Diode Controller over p-FET configuration as pointed out in this article:
Other Parts Discussed in Post: LM74610-Q1
When you fly on an airline, you’ll occasionally hear “Thank you for flying with X; we know you have many choices when you fly.” Similarly, engineers have many…
Using Tina TI for simulating before testing the most important Con for the p-FET: negative voltage during Dynamic Reverse Polarity is not 'happening'.
I am out of ideas so any help is welcome.
Regards,
Robert
