BQ20Z75-V180: Comparing .senc Files, .dfi content

Hi Salomon,
What are you trying to achieve in comaparing the sencs? The sencs are encrypted. Perhaps there is a different way to do what you are trying to do.
The dfi contains the chem id. The accessible parameters available to you in data flash are the only parameters you are allowed to modify.

I have two different senc files circulating in a number of batteries and need to determine the differences. I don't know exactly how they were modified. What I do know is that they are different. The only difference I see is the chem ID which you confirmed lives in the .dfi and not in the .gg file. It is important to record the exact configuration being programmed in the battery. The documentation (Figure A-6 of slua421a) describes the .gg file as the only user-accessible data flash. However,  the documentation (sluu278 Section 4) describes a method of modifying the chem ID using the EV software. And as you stated, the chem ID lives in the DFI. In essence, for configuration control, I need to know, with the highest certainty, that there are no other unintentional changes between the senc files. A confidence building question could be, is there any other DFI or senc parameters that may have been unintentionally changed between the two senc files? I understand that the DFI is not typically user accessible but it is clear that at least the chem id is, and I need to know which other parameters to check for potential differences.