BQ78350-R1: Automate the programming process for the BQ78350-R1 (from uC -> BQ -- [CANopen -> SMbus -> BQ])

Nicolás Román

Part Number: BQ78350-R1
Other Parts Discussed in Thread: BQSTUDIO,

Dear team,

Do we have a app note showing on how to handle the automated programming with out the BQstudio, only using the *.srec file?

e.g. a whitepaper or app note on how to program the BQ using a micro controller.

BR,

Nico

0 Bryan Kahler over 7 years ago

Hi Nico,

It is recommended to use bqStudio. We cannot support custom programming, however here is an app note with the msp430 and another bq device: www.ti.com/.../slaa476a.pdf

here is an app note on gauge communication: www.ti.com/.../slua801.pdf

and an app note on smbus: www.ti.com/.../slua475.pdf

The above app notes are generic treatments. For dataflash programming specific to the bq78350-r1, please refer to: http://www.ti.com/lit/pdf/slua742

Sincerely,
Bryan Kahler

0 Nicolás Román over 7 years ago in reply to Bryan Kahler

Hi Bryan,

thank you for the fast answer!

BR,
Nico

Power management forum