• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 688 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ40Z50-R2: Power Config: SLP_ACCUM (Bit 8): Enables charge accumulation while in SLEEP mode

Daniel Yu
Prodigy 70 points
Part Number: BQ40Z50-R2

Hi there,

Can someone please help on illustrate more about "charge accumulation while in sleep mode" and its impact?

Thanks a lot!

Daniel Yu

  • 0
    TI__Mastermind 34775 points
    Hi Daniel,

    When the gauge is in sleep mode it wakes up every <Sleep Current Time> in seconds to measure the current vs every second in normal mode. The current measured is used to calculate the accumulated charge every second. The SLP_ACCUM bit enables or disables the calculation of charge accumulation during sleep. Disabling this calculation cause SOC error due to missed coulomb counting, if the gauge is in sleep mode for extended periods.