bq34z100-G1: Instruction to load golden image file in embedded system

Steven Confer

Part Number: BQ34Z100-G1
Other Parts Discussed in Thread: BQ34Z100, BQSTUDIO

Is there information on how/where to load the golden image file, that is generated using the calibration software, onto the chip. I'm assuming it is loaded onto Data Flash.

over 7 years ago

0 Bryan Kahler over 7 years ago

TI__Mastermind 25955 points

Hi Steven,

It is loaded onto dataflash.

With the golden image created, here is an app note on taking the device to production, written for the older bq34z100: www.ti.com/.../slua665.pdf

For more information on how to communicate with via advanced communication tab on BqStudio via I2C, please refer to: www.ti.com/.../slua790.pdf

Sincerely,
Bryan Kahler

0 Bryan Kahler over 7 years ago in reply to Bryan Kahler

TI__Mastermind 25955 points

Hi Steven,

If the above response helped resolve your question, please click on the 'This Resolved my Issue' button below to improve the find-ability of this response for others that may have the same issue. Thanks!

Sincerely,
Bryan Kahler

Power management

Power management forum

bq34z100-G1: Instruction to load golden image file in embedded system