BQ35100: Going to Production Process

Jerry Chu

Part Number: BQ35100

Hi Expert,

We want to measure CR123A battery, found the CHEM ID and modify the data memory, when we start to loading the system, the gauge SOH didn't work.

Seems bq35100 is quite difference with the other gauge. Do you have the document to describe the production process? Or you can provide the steps to do it? Thanks!

over 7 years ago

0 Onyx Ahiakwo over 7 years ago

TI__Guru* 76230 points

Hi Jerry,

You need to check to see what mode you have the bq35100 configured as. Are you using it in SOH mode or EOS mode.? How are you testing the SOH when you say it doesn't work? Are you actually discharging the battery, or are you using a power supply for the battery and adjusting the voltages?

thanks
Onyx

0 KimHsu over 7 years ago in reply to Onyx Ahiakwo

Intellectual 545 points

Dear Onyx:

What is different result we get between use battery discharge or power supply emulation?

0 Kang Kang over 7 years ago in reply to KimHsu

TI__Mastermind 24870 points

Please use the actual battery for this device.

Power management

Power management forum

BQ35100: Going to Production Process