TPS40210: Webench Cannot Create Design

Ting Ye

Genius 11800 points

Part Number: TPS40210
Other Parts Discussed in Thread: TPS40211

Thank you.

Regards,

Ting

over 6 years ago

0 Youhao Xi over 6 years ago

TI__Guru 74410 points

It seems the LM40210 SEPIC is not supported by Webench. I will check with the Webench group.

0 Youhao Xi over 6 years ago in reply to Youhao Xi

TI__Guru 74410 points

Sorry for the typo: I meant TPS40210

0 Gerold Dhanabalan - Online Design Tools over 6 years ago in reply to Youhao Xi

TI__Genius 14455 points

Hi Ting, Youhao,
We have the TPS40211 in SEPIC planned for this year 2018 in WEBENCH. It is currently not available.
Regards,
Gerold

0 Ting Ye over 6 years ago in reply to Gerold Dhanabalan - Online Design Tools

TI__Genius 11800 points

Hello Youhao, Hello Gerold,

Thank you for helping timely!

Regards,
Ting

0 Gerhard van Rensburg over 6 years ago in reply to Gerold Dhanabalan - Online Design Tools

Intellectual 400 points

Gerold Dhanabalan - Online Design Tools said:
Hi Ting, Youhao,
We have the TPS40211 in SEPIC planned for this year 2018 in WEBENCH. It is currently not available.
Regards,
Gerold

Gerold,

I the TPS40210 now in WEBENCH or still not.

Regards

0 Gerold Dhanabalan - Online Design Tools over 6 years ago in reply to Gerhard van Rensburg

TI__Genius 14455 points

Hi Gerhard,

We have started work on the TPS40210. Expect the WEBENCH design to be available by end of May.

You can use the PMP8656 reference design as an example if you think that will help.

http://www.ti.com/tool/PMP8656?keyMatch=&tisearch=tidesigns&keyMatch=PMP8656&tisearch=Search-EN-Everything

Regards,

Gerold

0 Gerhard van Rensburg over 6 years ago in reply to Gerold Dhanabalan - Online Design Tools

Intellectual 400 points

Gerold,

Searching TI site, it shows that TPS40210 has a Vout (max) of 60V.

I understand it is not in Webench yet, but what limits it to 60V in boost mode.?

Regards

0 Youhao Xi over 6 years ago in reply to Gerhard van Rensburg

TI__Guru 74410 points

I don't see why the boost is limited at 60V. This is transferred from a different product line to us and we will update the Web page.

Thank you for the info.

Power management

Power management forum

TPS40210: Webench Cannot Create Design