• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 355 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS563201: TPS563201DDCR question

Roy wang
Intellectual 775 points
Part Number: TPS563201

Hello;

We have a design that needs 5V, 3.3V and 1.2V；input 15V；output current 2A；

Data sheet that filter capacitor Cout  range is 20--68uF；My design need Cload=100uF；

If this design, is there any question?

please help to check it，thanks.

  • 0
    TI__Expert 5745 points

    please upload your schematic. And for different Vout, we suggest different L and C for a better performance. 

    For Cout=100uF, there will be not a big problem, but the cross frequency will be decreased and the load transient will be not very good.

    So if you don't mind the load transient, you can use the L=3.3uH,Cout=100uF for 5Vout, L=2.2uH, Cout=100uF for 3.3Voutand 1.2Vout.