Hi TI,
Our customer use TPS5432, there are ten output short circuit in a hundred(10% defect rate). Please help check if there is any problem with the schematic diagram and pcb diagram?
Many thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI,
Our customer use TPS5432, there are ten output short circuit in a hundred(10% defect rate). Please help check if there is any problem with the schematic diagram and pcb diagram?
Many thanks.
Sorry for the later. I'm very busy recently.
1, add the divide resistor in the EN pin, the max voltage of EN is 3.6V and your Vin-=5V which will damage EN pin.
2, use the WEBENCH optimize your schematic. espacially the components in the COMP pin.
3, Optimize your layout refer to the datasheet or WEBENCH.
Thank you!