Hello.
I have a question about TPS27081A.
Vin=0V
ON/OFF-pin=5V(Apply signal)
Is this condition OK? (Does IC have damage?)
Thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello.
I have a question about TPS27081A.
Vin=0V
ON/OFF-pin=5V(Apply signal)
Is this condition OK? (Does IC have damage?)
Thank you.
Hi Masazumi,
This will not damage the device. 5V is well within the limits for the device, and this will not bias the PMOS at all, so there will be no stress on this FET.
Thanks,
Alek Kaknevicius