Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 433 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3560: LM3560 circuit check ~

Chen Bogey8
Mastermind 9990 points
Part Number: LM3560
Other Parts Discussed in Thread: LM3559

Hi Sir 

My customer want use LM3560 in Led1+Led2 (1A+1A)  application. May we can follow Datasheet Figure 41. circuit?

If there having other things we need notice?

I reference LM3559/LM3560 Evaluation Board Schematic, there have more R1/R2(0.1 ohm) . what function for this?

is it necessary? Rth no populated. is it need?

                                                          Bogey