• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 237 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5175: minimum of dead time

Wiky Liao
Intellectual 1940 points
Part Number: LM5175

Hi Team,

may I know the minimum of t_DT1 and t_DT2 of LM5175? The datasheet only shows the typical is 55ns, but we want to know the minimum value of them, thanks.

Wiky

  • 0
    TI__Guru* 78270 points
    If the datasheet does not include the data, most probably the IC was not characterized for it, and the tolerance is not considered very critical for the applications. For these two data, we do not have the characterization data. If your customer has a particular concern, please let us know. You can also send emails to us.