Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 784 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS92515-Q1: surge test

Takao Yamamoto5
Expert 1690 points
Part Number: TPS92515-Q1

Dear all,

My customer must conduct following surge test.

However, I think this device will be broken because this device's absolute maximum rate is 45V.

Is my understanding wrong?

In addition, could you teach me how to take measures against this surge?

Best regards,

  • 0
    TI__Mastermind 25500 points

    Hello Takao,

    The HV version has an abs max of 65V. However damage can occur at anything over the abs max so an 80V transient would need to be suppressed. The most common method is to use a TVS at the input of the device to clamp VIN at 65V or less.

    Regards,

    Clint