BQ27541: BQ easy

milla key

Intellectual 415 points

Part Number: BQ27541
Other Parts Discussed in Thread: BQSTUDIO, GPCCHEM

hello all

am looking how to generate a golden image bq27541G1 using bq management software?

because this software doesnt contain bqEasy

over 7 years ago

0 Onyx Ahiakwo over 7 years ago

TI__Guru* 76230 points

Hi Mila,
I responded to your other post. Use bqstudio to extract a flash stream file.
thanks
Onyx

0 milla key over 7 years ago in reply to Onyx Ahiakwo

Intellectual 415 points

would you like to tell me the steps that i should take to generate a golden image ?

0 Onyx Ahiakwo over 7 years ago in reply to milla key

TI__Guru* 76230 points

-identify your chem id using gpcchem.
-Program the chem id and then configure your gauge settings for your application. Perform Voltage, current and temperatiue calibration
-Run learning cycle and evaluate performance of the gauge.
-extract golden srec or dffs using golden image tab of bqstudio.
thanks
Onyx

0 milla key over 7 years ago in reply to Onyx Ahiakwo

Intellectual 415 points

in order to enable it i need to send (0x0021) via the bqStudio but i dont exactly where i write this command?

Power management

Power management forum

BQ27541: BQ easy