LM3670MF-1.8EV: LM3670MF-3.3

AMIR SALHUV

Part Number: LM3670MF-1.8EV

Hi ,

we are working with this IC for already couple of years. In our new project, we have encountered issue that might be related to ESD, causing the IC to burn. I have one unit with a burn IC in it, is it possible to send you the unit for inspection? in order of understanding what was the reason ?

Thanks

Please note that our part is the one with 3.3V output.

Amir

over 7 years ago

0 Chris Glaser over 7 years ago

TI__Guru**** 150740 points

Hi Amir,

You need to work with the distributor that you purchased the devices from for a return.

0 Chris Glaser over 7 years ago in reply to Chris Glaser

TI__Guru**** 150740 points

Hi Amir,

Were you able to work with your distributor to start a return?

If you want to try and debug your issue here, please send your schematic, PCB layout, and failure description.

0 AMIR SALHUV over 7 years ago in reply to Chris Glaser

Prodigy 45 points

Hi ,

I have a problem sending to my distributor since we are change our production factory and we are using currently the old quantities. Since we are only at DV stage, we don't have new distributor. Please send me an Email address so I can send you the data.

Thanks,

Amir

0 Chris Glaser over 7 years ago in reply to AMIR SALHUV

TI__Guru**** 150740 points

Hi Amir,

I don't understand, but you can start a private conversation with me by clicking on my name and then 'connect' to send me any information that you cannot share here.

0 Chris Glaser over 7 years ago in reply to Chris Glaser

TI__Guru**** 150740 points

Hi Amir,

Did you resolve this on your own? If not, please send me your data in the private conversation that we started last week.

Power management

Power management forum

LM3670MF-1.8EV: LM3670MF-3.3