Good morning,
a few weeks ago I've applied the learning cycle procedure to my battery pack (Li-ion 1S5P) and I've generated the golden file accordingly also to suggestions received on this post:
Now I'm going in production, but on programmed boards I have the following situation:
- SOC = 0
- Max Error = -112
I've found this post where somebody hat the same problem, but I cannot find the proposed solution.
Below you can find my gg file and a screenshot of the BQ_Studio registers page (unfortunately I don't have any log).
0100_0_16-bq34z100G1_smart_bridge_180521_modified.gg.csv.zip
Have you got any suggestion? I'm going in production and now I had to stop it for this issue...
Thank you very much
Matteo