• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 274 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ78350: bq78350 +bq76930

user5034713
Prodigy 70 points
Part Number: BQ78350
Other Parts Discussed in Thread: BQ76930, ,

We use bq76930 + bq78350 for our 7S project,  when short circuit occured,  FET can not be turned on, How to recover from protection and make FET on.  thanks.

  • 0
    TI__Guru 54715 points
    Hi User,
    The normal recovery is through time. Be sure the short is removed. If the short is still present the fault will re-occur when it recovers. See the bq78350-R1 technical reference manual (we recommend the bq78350-R1 or -R2 firmware) ASCD section. See also the the section 3.1.3 for removal recovery.
    Check your settings. Also you might search for other similar questions, older posts may have good information.