Linux/TLC59108: can't seem to control LEDs at all, maybe causing damage

user5184459

Part Number: TLC59108

Tool/software: Linux

My design is failed , can you give some suggestions for "RESET" pins. what's more , IS all out pins must be connectted to leds?

over 7 years ago

0 Kenneth Du over 7 years ago

TI__Genius 14295 points

Hi,

Please refer to 9.3.4 External Reset in datasheet for the RESET pin.

The output pin can be left floating if not used.

Please help to click "Resolve" if the problem is solved.

Thanks.
Regards,
Kenneth

Power management

Power management forum

Linux/TLC59108: can't seem to control LEDs at all, maybe causing damage