TPS54160: Unencrypted

Alihan ATAY

Part Number: TPS54160
Other Parts Discussed in Thread: TINA-TI

Hello,

I am a Altium Designer user. and using Altium Designer's simulation. But I can not use TPS54160 IC's spice model because the spice model is encrypted. I need an unencrypted spice model of TPS54160. Can you provide me this?

Thanks.

Alihan

over 7 years ago

0 Samuel Jaffe over 7 years ago

TI__Mastermind 25590 points

I've forwarded this to the spice team. They will be able to help you shortly.

-Sam

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Samuel Jaffe

TI__Mastermind 39210 points

This post should answer your question: e2e.ti.com/.../692613

0 Alihan ATAY over 7 years ago in reply to Nikhil Gupta (Product Folder Models)

Prodigy 20 points

I'm not ımport encrypted spice model into Altium Designer.

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Alihan ATAY

TI__Mastermind 39210 points

Hi Alihan,

As the above FAQ post said, you can not import the encrypted model from one simulator to another. The post also has instructions on how to request an unencrypted model. Please make sure you have gone through it in detail.

I will also caution you, just because you can import an unencrtypred netlist to another tool, does not mean you will get the correct results since simulators have their own algorithms and react differently to the same netlist.

I would recommend you give TINA-TI a try. IT is a free simulator from TI and the TINA-TI model should already be setup for you.

Power management

Power management forum

TPS54160: Unencrypted