DCPA10505: Can DCP10505 parallel for higher current output?

Eddie Chou

Expert 5630 points

Part Number: DCPA10505

Hi team,

We introduce DCPA10505 however output power doesn't customer requirement,

Can customer parallel DCP10505 to support higher current output?

Thanks & Regards

Eddie

over 6 years ago

0 Tom Guerin over 6 years ago

TI__Mastermind 38230 points

Eddie:

DCPA10505 can be paralleled for increased for doubled 2 Watt output . See DCPA10505 product specification page 18 for additional details . Schematic for parallel is below.

Tom

0 Kai Hsiao over 6 years ago in reply to Tom Guerin

Guru 12675 points

Hi Tom

Do we have to use external clock or not

If the external clock is necessary ,how about the frequency ?

0 Tom Guerin over 6 years ago in reply to Kai Hsiao

TI__Mastermind 38230 points

2) DCPA10505P single output used in parallel output operation, The synchronization feature allows easy synchronization to prevent power rail beat frequencies with no additional filtering .

Synchronizating frequency \range is 750kHz to 1000kHz.

Tom

0 Kai Hsiao over 6 years ago in reply to Tom Guerin

Guru 12675 points

Hi Tom

May I use DCPA10505 without external clock ?

I saw DCP02 series could be used without external clock for parallel application

0 Tom Guerin over 6 years ago in reply to Kai Hsiao

TI__Mastermind 38230 points

Eddie:

Yes the DCPA10505P can be used in parallel operation without the external clock circuit. The output noise ripple will be more as- symmetric when not using an external clock circuit.

Regards

Tom

Power management

Power management forum

DCPA10505: Can DCP10505 parallel for higher current output?