• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 371 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ27541-G1: Cannot Complete Calibration

BQ27541-G1: Cannot Complete Calibration

Halil BILGIN
Prodigy 35 points
Part Number: BQ27541-G1
Other Parts Discussed in Thread: BQSTUDIO

Hello All, we are also in a similar status, could you please advice, weather you were successfull?

I understand, that you wanted to create a Golden Image and then roll out it to your massproduction?

was this successfull? can you help us as well?

thanks!

  • 0
    TI__Guru* 76230 points
    Hi Halil,
    Can you share the register screen of bqstudio when connected to the device.
    I have reason to believe the device is sealed as that is one of the main reasons why calibration is not successful. You need to unseal the gauge and then put it in full access mode before you are able to calibrate. Let me know if you have further questions.
    thanks
    Onyx