• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 353 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25895: ADC conversion time

Sherry Liang
Genius 10255 points
Part Number: BQ25895

Dear team,

The ADC conversion time of the bq25895 is 10ms. There are 5 channel signals are sampled in total.

Is it 10ms for one channel, then a total of 50ms, or 5 channels for a total of 10ms?

Could you please help to answer it?

Thanks!

Sherry

  • 0
    TI__Genius 10240 points
    Sherry,

    There is one ADC in BQ25895. A MUX is used to connect one of the five the signal channels to the ADC. The conversion time is for one signal conversion. Please refer to the BQ25895 datasheet Section Battery Monitor for tconv.