Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 601 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3243: A question about the VCON Pin of LM3243

Erwin Xie
Intellectual 935 points
Part Number: LM3243

hi, 

I’m the FAE. my customer wants to use your product line’s LM3243.

As we know LM3243’s output voltage is set by VCON pin, in a typical application, this pin is connected to a DAC’s output.

So the question is, whether they can use a resistor net to set the output voltage as the figure shown?

Thank you very much.