WEBENCH® Tools/LMR14030: We input Pspice of LMR14030 into ADS2016 but still failed

Muller Zhu

Prodigy 250 points

Part Number: LMR14030
Other Parts Discussed in Thread: TINA-TI

Tool/software: WEBENCH® Design Tools

We input Pspice of LMR14030 into ADS2016 but still failed

Error like below

over 7 years ago

0 Andy Chen over 7 years ago

TI__Mastermind 34625 points

Hi Muller,

Let me check it with Webench team and update you later.

B R

Andy

0 Nikhil Gupta (Product Folder Models) over 7 years ago in reply to Andy Chen

TI__Mastermind 39210 points

Hi Muller,

ADS is not supported by us in terms of behavioral model. It would be best to check this with Keysight if you are required to use ADS only.
The other option is to use TINA-TI. It is a free simulator from TI and the simulation is already setup in TINA-TI so you have a good starting point (use the export from WEBENCH option).

If you are new to TINA-TI, the short video training series below will help you get ramped up quickly./

Power management

Power management forum

WEBENCH® Tools/LMR14030: We input Pspice of LMR14030 into ADS2016 but still failed